-
Ucl RedBloodCell fluorocarbon Ecoli Chungnam_National_University NUS LowDensityPolyethylene Genetic Regensburg Chloroform phase_change ChemicalCompound Lift MonoLayer Device Ananth polymeric_arrays optoelectronics BoronNitride Blood Typhimurium Annealing CancerCell Techcomp Tapping TPU LDPE NanoLithography VinylAlcohol TiO2 rubber GlassTemp NiFe Ni81Fe19 NCM
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm