-
Cross-section LifeScience Gallium Device GaAs thermal_conductivity TCS frequency_modulation Co/Cr/Pt fluoroaalkane TemperatureControllerAFM Sio2 PpLdpe Water VerticalPFM hard_disk ChemicalCompound ThermalDetectors 3-hexylthiophene SiWafer Galfenol TappingMode temperature_control Spincast Nanofiber Calcite FuelCell Sphere CopperFoil temperature controller AFM Aluminium_Oxide pulsed_laser_deposition NanoLithography Inorganic cross section
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Lithography on Si substrate
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: ContscPt (k=0.2N/m, f=25kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 1Hz
- Pixel: 1024×512
- Litho. mode: Tip bias mode
- Litho. Tip bias: Black -10V, White 0V