Styrenic block copolymer embedded in rubber
The styrenic block copolymer was scanned using PinPoint nanomechanical mode to simultaneously acquire both the surface mechanical properties and the topography. The scan image shows the height (left) and adhesion energy (right), highlighting the differences between the block copolymer and the rubber.
Scanning Conditions
- System: NX10
- Scan Mode: PinPoint mode (Channel: Z Height, Adhesion Energy)
- Scan Rate: 0.29 Hz
- Scan Size: 1 µm × 1 µm
- Pixel Size: 200 × 200 pixels
- Peak-to-valley: 169.9 nm
_Ondemand.png)
%20Webinar.png)
×