-
cannabinoid STM MoS2 temperature controller AFM DomainSwitching UnivMaryland DLaTGS Aluminum Semiconductor Kevlar ThermalConductivity Vinylpyridine CalciumHydroxide Ananth CrAu Cobalt AlkaneFilm Sulfur BFO Floppy Bmp OpticalModulator FAPbI3 Fendb TempControl Mechinical CrossSection ElectroChemical Pzt Mechanical&nanotechnology membrane Neodymium PvdfBead hetero_structure Terrace
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ITO Film Sputter Deposited onto Silicon
ITO-film, which was sputter deposited onto silicon. The grain size of those samples was influenced by changing the process settings in the Cluterline RAD sputter deposition system, one of the deposition tool platforms manufactured by Evatec.
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: PPP-EFM (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 0.1Hz
- Pixel Size: 256 × 256
- Scan Mode: Non-contact
- Cantilever: PPP-EFM (k=2.8N/m, f=75kHz)
- Scan Size: 5μm×5μm
- Scan Rate: 0.1Hz
- Pixel Size: 256 × 256