-
Semiconductor Polyvinylidene_fluoride Vanadate SoftSample Temasek_Lab Galfenol Dopped BFO 3-hexylthiophene EFMAmplitude Chloroform SiWafer Singapore dielectric_trench Chemical_Vapor_Deposition LaAlO3 INSP ForceVolumeMapping sputter MfmAmplitude Polyimide PatternedSapphireSubstrat ChemicalCompound Device PhthalocyaninePraseodymium Regensburg AtomicLayer TransitionMetal Bacteria TriGlycineSulphate Sadowski PetruPoni_Institute CaMnO3 HiVacuum hard_disk_media
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm