Park NX20 Lite

You are here:
Home
Products & Solutions
Park AFM Options
Products
Park NX20 Lite

Increase your productivity with our powerfully versatile AFM

The Park NX20 Lite includes many unique capabilities that make it ideal for shared labs that handle a diverse range of samples, researchers doing multi variant experiments, and failure analysis engineers working on wafers. Its reasonable price and robust feature set also make it one of the best value large-sample AFMs in the industry.

The Most Convenient Sample Measurements with MultiSample Scan

Automated imaging of multiple samples in one pass
Specially designed multi-sample chuck for the loading of up to 16 individual samples (optionally available)
Fully motorized XY sample stage travels up to 150 mm x 150 mm

Accurate XY Scan by Crosstalk Elimination

Two independent, closed-loop XY and Z flexure scanners
Flat and orthogonal XY scan with low residual bow
More accurate height measurements enabled by NX electronic controller without any need for software processing

Best Tip Life, Resolution and Sample Preservation by True Non-Contact™ Mode

Fast Z-servo speed enabling True Non-Contact™ Mode
Minimum tip wear for prolonged high-quality and high-resolution imaging

Versatile Range of Modes and Options

Comprehensive set of measurement modes and characterizations
Expanded capabilities with optional accessories and upgrades
Advanced electrical measurements for failure analysis (FA)

The Most Extensible AFM Solution

Supports Park’s most extensive range of SPM modes and options in the industry

Today's researchers need to characterize a wide range of physical properties under diverse measurement conditions and sample environments. Park Systems provides the most extensive range of SPM modes, the largest number of AFM options, and the best option compatibility and upgradeability in the industry for advanced sample characterization.

Park NX20 Lite has the most extensive range of SPM modes

Topography Imaging

Dielectric/Piezoelectric Properties

Magnetic Properties

Magnetic Force Microscopy (MFM)

Electrical Properties

Mechanical Properties

Chemical Properties

Chemical Force Microscopy with Functionalized Tip
Nanoindentation
Electrochemical Microscopy (EC-AFM)

The most convenient sample measurements with MultiSample™ scan

Park NX20 Lite MultiSample™ scan system

Automated imaging of multiple samples in one pass
Specially designed multi-sample chuck for the loading of up to 16 individual samples
Fully motorized XY sample stage travels up to 150 mm x 150 mm

Using the motorized sample stage, MultiSample Scan™ enables programmable multiple region imaging in step-and-scan automation.

Here’s how it works:
1. Register multiple scan positions defined by a user
2. Image from the first scan position
3. Lift a cantilever
4. Move the motorized stage to the next user defined coordinate
5. Approach
6. Repeat scan

The registration of multiple scan positions is easily carried out by either entering sample-stage coordinates or sample de-skewing by two reference points. This automated feature greatly increases productivity by reducing the need for your interaction during the scan process.

Flat Orthogonal XY Scanning without Scanner Bow

Park's Crosstalk Elimination scanner structure removes scanner bow, allowing flat orthogonal XY scanning regardless of scan location, scan rate, and scan size. It shows no background curvature even on flattest samples, such as an optical flat, and with various scan offsets. This provides you with a very accurate height measurement and precision nanometrology for the most challenging problems in research and engineering.

Decoupled XY and Z Scanners

The fundamental difference between Park and its closest competitor is in the scanner architecture. Park’s unique flexure based independent XY scanner and Z scanner design allows unmatched data accuracy in nano resolution further improved with NX AFM Head (Z scanner) powered by NX AFM electronic controller.

Industry Leading Low Noise Z Detector

Park AFMs are equipped with the most effective low noise Z detectors in the field, with a noise of 0.02 nm over large bandwidth. This produces highly accurate sample topography and no edge overshoot. Just one of the many ways Park NX series saves you time and gives you better data.

Accurate Sample Topography Measured by Low Noise Z Detector

Uses low noise Z detector signal for topography
NX electronic controller provides low Z detector noise of 0.02 nm over large bandwidth
Has no edge overshoot at the leading and trailing edges
Needs calibration done only once at the factory

Sample: 1.2 μm Nominal Step Height
(9 μm x 1 μm, 2048 pixels x 128 lines)

Better tip life, sample preservation, and accuracy with True Non-Contact™ Mode

True Non-Contact™ Mode is a scan mode unique to Park AFM systems that produces high resolution and accurate data by preventing destructive tip-sample interaction during a scan.

Unlike in contact mode, where the tip contacts the sample continuously during a scan, or in tapping mode, where the tip touches the sample periodically, a tip used in non-contact mode does not touch the sample. Because of this, use of non-contact mode has several key advantages. Scanning at the highest resolution throughout imaging is now possible as the tip’s sharpness is maintained. Non-contact mode avoids damaging soft samples as the tip and sample surface avoid direct contact.

Accurate Feedback by Faster Z-servo enables True Non-Contact AFM

Less tip wear → Prolonged high-resolution scan
Non-destructive tip-sample interaction → Minimized sample modification
Maintains non-contact scan over a wide range of samples and conditions

Furthermore, non-contact mode senses tip-sample interactions occurring all around the tip. Forces occurring laterally to tip approach to the sample are detected. Therefore, tips used in non-contact mode can avoid crashing into tall structures that may suddenly appear on a sample surface. Contact and tapping modes only detect the force coming from below the tip and are vulnerable to such crashes.

Technical deep trench

Park NX20 Lite Specifications

Scanner

Z Scanner

Flexure guided high-force scanner
Scan range: 15 μm (optional 30 μm)

XY Scanner

Single module flexure XY-scanner with closed-loop control
Scan range: 100 µm × 100 µm

Stage

XY stage travel range: 200 mm (Motorized) (150 mm optional),
optional precision encoders for better XY stage repeatability
Z stage travel range: 25.5 mm (Motorized),
optional precision encoder for better Z stage repeatability
Focus stage travel range: 8 mm (Motorized)

Sample Mount

Sample size: Up to 200 mm wafer sample
(Optional 200 mm Vacuum Sample Chuck)

On-Axis Optics

10x (0.21 N.A.) ultra-long working distance lens (1µm resolution)
Direct on-axis vision of sample surface and cantilever
Field-of-view : 480 × 360 µm (with 10× objective lens)
CCD : 1.2 M pixel, 5 M pixel (optional)
(optional; Field-of-view: 840 µm x 630 µm)

Software

SmartScan™

• AFM system control and data acquisition software
• Auto mode for quick setup and easy imaging
• Manual mode for advanced use and finer scan control

SmartAnalysis™

• AFM data analysis software
• Stand-alone design—can install and analyze data away from AFM
• Capable of producing 3D renders of acquired data

Electronics

4 channels of flexible digital lock-in amplifier
Spring constant calibration (Thermal method)
Digital Q control

Options/Modes

Accessories*

• Universal Liquid Cell with Temperature Control
• Temperature Controlled Stage 1, 2 and 3
• Electrochemistry Cell
• High-field Magnetic Field Generator