-
Defect medical Ca10(PO4)6(OH)2 Polytetrafluoroethylene chemical_compound OpticalWaveguide Ucl InsulatorFilm Hydroxyapatite Grain aluminum_nitride SingleLayer Treatment Ecoli VerticalPFM Piranha PANI MfmAmplitude ElectroChemical Scratch piezoelectric force microscopy Copolymer ForceVolume LiftHeight BiasMode Styrene Film lithography Conducting Modulus Mfm Conductivity LiquidCell solar_cell HighResolution
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Collagen film phase change by temp
Scanning Conditions
- System: NX10
- Scan Mode: Tapping
- Cantilever: AC160TS
- Scan Size: 20μm×20μm, 1μm×0.5μm
- Scan Rate: 0.3Hz for 20µm×20µm scan, 1Hz for 1µm×0.5µm scan
- Pixel: 512 × 256 for 20µm×20µm scan, 256 × 128 for 1µm×0.5µm scan
- Scan Mode: Tapping
- Cantilever: AC160TS
- Scan Size: 20μm×20μm, 1μm×0.5μm
- Scan Rate: 0.3Hz for 20µm×20µm scan, 1Hz for 1µm×0.5µm scan
- Pixel: 512 × 256 for 20µm×20µm scan, 256 × 128 for 1µm×0.5µm scan