-
Phthalocyanine Oxidation PhaseTransition Formamidinium_lead_iodide StrontiumTitanate WS2 HACrystal hard_disk SFAs OpticalWaveguide MBE Polytetrafluoroethylene InorganicCompound Lateral ElectrostaticForceMicroscopy Nanotechnology Hafnium_dioxide Mosfet HfO2 silicon_oxide GaN BlockCopolymer MoirePattern Ferroelectric AdhesionEnergy NCM atomic_steps Gallium_Arsenide AdhesionForce Glass frequency_modulation Pyroelectric ULCA Spain ScanningThermalMicroscopy
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Adhesive system
Scanning Conditions
- System: NX10
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256
- Scan Mode: PinPoint
- Cantilever: ACST (k=7N/m, f=150kHz)
- Scan Size: 30μm×30μm, 20μm×20μm
- Scan Rate: 0.23Hz
- Pixel: 256×256