-
GaP NanoLithography ForceVolumeImage CaMnO3 pinpoint mode KelvinProbeForceMicroscopy Polypropylene SSRM OpticalElement plastics BlockCopolymer fluorocarbon Liquid semifluorinated_alkanes EvatecAG Ecoli Dopped YszSubstrate AM_KPFM silicon_oxide Patterns NUS Pinpoint PFM Piezoresponse Bio GlassTemperature Celebration NUS_Physics dichalcogenide P3HT FailureAnlaysis non_contact Sadowski PetruPoni MechanicalProperties
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
CrAu surface
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: AC160TS (k=26N/m, f=300kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 0.5Hz
- Pixel: 256×256
- Scan Mode: Non-contact
- Cantilever: AC160TS (k=26N/m, f=300kHz)
- Scan Size: 2μm×2μm
- Scan Rate: 0.5Hz
- Pixel: 256×256