-
Fe_film Chemical Vapor Deposition Defects Tapping StyreneBeads plastic ElectrostaticForceMicroscopy semifluorinated alkane silicon_oxide ThinFilm Singapore Pzt Filter OpticalWaveguide Vinylpyridine Polyvinylidene STM contact Electronics Pvdf ForceVolumeMapping Titanate Edwin ForceVolumeImage SRAM layers TPU ImideMonomer Galfenol NUS Typhimurium WPlug tip_bias_mode SThM ScanningThermalMicroscopy
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm