-
StyreneBeads Piezo CuSubstrate ContactModeDots Mosfet Composite PVAC PS_PVAC Metal SPMLabs tip_bias_mode Optoelectonics SiliconeOxide OpticalModulator Dr.JurekSadowski blended polymers MagneticPhase SRAM 2d_materials StainlessSteel PrCurve IcelandSpar electrospinning biocompatible self_healing Ptfe Chemical_Vapor_Deposition GalliumPhosphide Fendb Piezoresponse BreastCancerCell CompactDisk epitaxy KPFM PECurve
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm