-
Lift Ferrite SetpointMode oxide_layer LFM IRDetector biocompatible hard_disk_media lithography FFM Thermoplastic_polyurethane mechanical_property Materials Adhesive Forevision Vacuum Oxide OrganicCompound HanyangUniv Mosfet SurfaceChange fifber Piezoresponse Filter OpticalWaveguides Pore MoirePattern TriGlycineSulphate Ceramic 2-vinylpyridine dichalcogenide Laser MoS2 Piranha NUS_NNI_Nanocore
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
MoS2 Layers on SiO2
A few layers of MoS2 on SiO2
Scanning Conditions
- System: NX10
- Scan Mode: AM-KPFM
- Cantilever: NSC36Cr-Au B (k=2N/m, f=130kHz)
- Scan Size: 30μm×30μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 256
- Scan Mode: AM-KPFM
- Cantilever: NSC36Cr-Au B (k=2N/m, f=130kHz)
- Scan Size: 30μm×30μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 256